Cutters for X91, X93 & X97
Generally a fine-toothed cutter gives the smoothest cut. Difficulties, however, could arise with feeding, when beveling harder or tougher materials, especially if the bevel is deep. In such cases a coarse-toothed cutter has to be used. Cutters with three different serrations can be supplied with the machine. Compare A, B and C on the picture.
Type A Coarse serrationThis cutter is recommended when performing maximum dimensions of bevels on large and heavy work-pieces.
Type B Medium serrationSuitable for large bevels on small work-pieces.
Type C Fine serrationAdvantageous for all materials when the width of bevel is below 15 mm (.59") and when the weight of the work-piece is below 50 kg (164 lbs).
Standard cutters recommended for materials with a tensile strength below 550 N/mm² (80,000 psi)
161.505.85 Cutter fine serrated
161.504.85 Cutter medium serrated
161.503.85 Cutter coarse serrated
198.724.01 Cutter medium serrated
High tensile "chipper" cutters are recommended for materials with a tensile strength between 550 N/mm² (80,000 psi) and 690 N/mm² (100,000 psi).
163.704.01 Cutter fine serrated chipper
163.703.01 Cutter medium serrated chipper
163.705.01 Cutter coarse serrated chipper
198.472.01 Cutter extra fine serrated
198.026.01 Cutter extra coarse serrated
Cutters for PULLMAX X8 and X10
Type A. Normal serratedThis cutter is recommended for all kinds of plate metal above 6 mm (0,25") thick, but not for pressure vessel steels.
Type B. Fine serratedThis cutter is recommended for all kinds of plate metal between 4 mm (0,16") and 10 mm (0,40").
Type C. Extra fine serratedThis cutter is recommended for all kinds of plate metal between 3 mm (0,12") and 6 mm (0,25") thick.